Wilwood -  PolyMatrix Pad Set - 6812 B DLS DLS Floater DPS 3 Hole

Wilwood - PolyMatrix Pad Set - 6812 B DLS DLS Floater DPS 3 Hole

BRAND: Wilwood

Available: In stock

SKU: Wilwood - 15B-9819K

$103.82

⏳ Sale ends in {timer}

PolyMatrix B Compound Pad Characteristics Medium-high friction pad with good initial response Good low temperature response Medium-low wear rate during sustained high heat braking High heat fade resistance Pad Applications...
 
FAST SHIPPING

On all products!

 
RETURNS

30 days return policy

 
TELEPHONE SUPPORT

(239) 270-5116

PolyMatrix B Compound

Pad Characteristics

  • Medium-high friction pad with good initial response
  • Good low temperature response
  • Medium-low wear rate during sustained high heat braking
  • High heat fade resistance

Pad Applications

  • Racing only - Not for street use
  • Road course
  • Oval pavement
  • Dirt all classes
  • Off road

Rotor Material

  • Steel
  • Iron
PolyMatrix B Performance StatsPolyMatrix B Performance StatsZoom Image
PolyMatrix B Friction Coefficient and Temperature ValuesPolyMatrix B Friction Coefficient and Temperature ValuesZoom Image

The above friction data (μ) was recorded through braking cycles from 95 mph to 40 mph at a 0.5g deceleration. Snubs were consecutively done until rotor temperature reached 1300°F. This graph represents average data and is for general trend visualisations only comparing Wilwood pads. Chart data should not be used in comparison with other manufacturer's data. Test conditions, variables, and environment can affect test results.

Temperature range and overall friction value are the primary considerations for pad selection. The pads must maintain the proper amount of friction for stopping power within the temperatures that will be realized on the track. Overall wear rate must also be considered. For most asphalt and road race applications, compounds in the high-temperature range over 1000°F are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on-track performance. If pad fade (friction loss) due to overheating occurs, improved cooling, a heavier rotor, or a higher temperature range pad may become necessary.

 

Picture shown is for illustrative purposes only

Reviews

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)