Vac Motorsport - Schrick - M20 Camshafts (SCH-CS-M20-272) (SCH-CS-M20-272)

Vac Motorsport - Schrick - M20 Camshafts (SCH-CS-M20-272) (SCH-CS-M20-272)

Vendor: Vac Motorsport

Available: In stock

SKU: SCH-CS-M20-272

$499.95

Schrick manufactures the finest camshafts from premium blanks in their state of the art facility in Germany. We have used Schrick cams in hundreds of engine builds and continue to...
 
FAST SHIPPING

On all products!

 
RETURNS

60 days return policy

 
TELEPHONE SUPPORT

(239) 270-5116

Schrick manufactures the finest camshafts from premium blanks in their state of the art facility in Germany.

We have used Schrick cams in hundreds of engine builds and continue to be impressed by their quality and consistent output in every application. VAC is USA's most exclusive and knowledgeable importer of Schrick components. We always keep a variety of Schrick cams for a range of applications in-stock.

 

We recommend the following:

272/272 degree Street & Daily Driver cam. Smooth and friendly drivability, more pep at all RPMs. An ECU chip or WAR chip is recommended for best results.
284/272 degree Ideal for Hi-Perf. Street or a Mild Track setup. Reliable and works well with stock or upgraded compression. An ECU chip or WAR chip is highly recommended for tuning.
Valve springs are recommended for endurance track use.
288/288 degree For regular track use, or a max-performance hot rod build.  A custom ECU chip or standalone programmable ECU will be required for tuning.
Valve springs are recommended for race use.
304/304 degree Race use at high RPMs. For the experienced builder who can build and tune an engine. Valve springs are recommended for race use.
Our race rocker arms are highly recommended
308/308 degree Race use at high RPMs. For the experienced builder who can build and tune an engine. Valve springs are recommended for race use.
Our race rocker arms are highly recommended
  • Installation with locking Adjustable Cam Gear is highly recommended for optimum performance with M20 performance camshafts. Especially if your cylinder heads and block has been decked.

 

For E30 325i, E28 525i, E34 525i applications with M20 Engines. Can be fitted to eta or "e" head with professional modification. If you have any questions, just talk to one of our engine consultants to guide you into the proper camshaft for your application.



VAC Pro Tech Tips:
-VAC always recommends High Performance Valve Springs even with mild camshaft upgrades. This insures our customers always get the best performance and reliability from their engine by preventing pistons-to-valve contact in the event of an over-rev or mis-shift.
-Please remember to always check piston to valve clearance when installing camshafts.
-All M20 cams should be installed with fresh rocker arms; premature wear of camshaft lobes is likely to occur otherwise.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Related Products