SRS-Concept - E36/E46 Twin Calipers Adapter V2 ( weld-on ) (3019)
BRAND: SRS-Concept
Available: In stock
SKU: SRS-3019
FAST SHIPPING
On all products!
RETURNS
30 days return policy
TELEPHONE SUPPORT
(239) 270-5116
More info
This is the last version of our famous twin calipers adapter kit. Now more compatibility possibility and easier to install! INSTRUCTIONS HERE
You want to use a twin calipers and you want to make it yourself for cheaper, this is for you! A set of 2 bracket for a perfect weld-on twin calipers setup. In drift you won’t deal with a in-line hydraulic setup who cant fail on hard braking.
This version is really light ! Only 0.42lbs on each side !
FIT ON BMW E36 ( 318, 325, i, is, e and M3), E46 ( 316, 320, 325, 328, 330, i, is, ci, xi, d, ds and M3 )
-Weld it !
-Paint it !
-Bolt it !
-Take a ride !
-These bracket are made with 0,5inch ( 12mm ) mild steel. Cut just for you !
-Each purchase are for a complete kit of 2 bracket ( a pair of 2 bracket for each purchase ! )
-NEED TO BE WELDED OVER THE ABS SENSOR HOLE. ( this kit will need you to cancel your abs system )
PARTS NEEDED:
- You need to route an hard line from your handbrake. So it included that you need to source some brake line.
- Of course, you will need an other set of calipers. You will need the same model of calipers you actually have on your car. So if you have a 328i, you will need 328i calipers. That’s for adapt perfectly to your rotors because BMW have many different size of rotors for the same chassis model. In case you have a big brake, you will need to source the same kit to get the same height and the right inside clearance for the thickness of the rotors.
- And a good set of brake pads
*Note: Pictures of the installed products may differ than the real parts. They are from customers builds, not necessarily recent and accurate.
Reviews
Customer Reviews
Product is solid. Turn up the heat and burn these things in. Feel more solid than the factory mounts
I had the brackets professionally installed on my 1998 328is, with minor grinding of the alignment tabs they fit quite well. Anyone with experience in welding/fabrication should be able to fit them fairly easily. Took about 3 hours once the trailing arms were out of the car.
The gap in the middle of the bracket to the knuckle is unreal I could have made a better fit with a grinder
I bought these for my 2005 bmw 325i doesnt have bigger brakes very much stock in that department. And I bolted these weld on brackets to my caliper bracket and with the caliper bracket laying on the rotor I still had a fat gap from weld on bracket to my rtab or hub so with the caliper bracket where it should of been not touching the rotor i had a healthy 1/2 gap to fill not an easy task!!! Really truly wish I had just bought bolt on brackets would of saved a ton of frustration and hassle these are supposed to be big enough to grind it down to what you need for clearance and on my car this wasn't even remotely true but I did manage to make it happen would of taken pictures but the welds are so ugly due to the grand canyon of a gap that had to be filled just buy bolt on!
No complaints here. Well see how much abuse these taps can take in the drift car 😝
Customer Reviews
Product is solid. Turn up the heat and burn these things in. Feel more solid than the factory mounts
I had the brackets professionally installed on my 1998 328is, with minor grinding of the alignment tabs they fit quite well. Anyone with experience in welding/fabrication should be able to fit them fairly easily. Took about 3 hours once the trailing arms were out of the car.
The gap in the middle of the bracket to the knuckle is unreal I could have made a better fit with a grinder
I bought these for my 2005 bmw 325i doesnt have bigger brakes very much stock in that department. And I bolted these weld on brackets to my caliper bracket and with the caliper bracket laying on the rotor I still had a fat gap from weld on bracket to my rtab or hub so with the caliper bracket where it should of been not touching the rotor i had a healthy 1/2 gap to fill not an easy task!!! Really truly wish I had just bought bolt on brackets would of saved a ton of frustration and hassle these are supposed to be big enough to grind it down to what you need for clearance and on my car this wasn't even remotely true but I did manage to make it happen would of taken pictures but the welds are so ugly due to the grand canyon of a gap that had to be filled just buy bolt on!
No complaints here. Well see how much abuse these taps can take in the drift car 😝