Radium - Engineering RB26DETT Fuel Rail Kit (RERFRK5489)
Available: In stock
On all products!
60 days return policy
This 1989-2002 Nissan Skyline GT-R fuel rail kit is designed specifically for OEM (R32/R33/R34) RB26DETT intake manifolds. Manufactured with a large 0.69" internal bore, the fuel rail can support all necessary engine power requirements. The rail is CNC machined from a custom 6063 aluminum extrusion and black anodized and laser etched for a high quality surface finish.
For thermal insulation, press-fit machined phenolic spacers and washers are included to completely isolate the fuel rail from heat transfer via the manifold and mounting bolts, as shown.
The upper injector bores are machined with a common 11mm ID (Denso). NOTE: Six custom upper injector O-rings are included allowing the use of OEM RB26DETT (JECS) injectors which normally require 10.45mm ID bores. The rail is compatible with all fuel types including popular alcohol mixtures such as E85.
- Black Anodized Aluminum Fuel Rail
- Insulating Phenolic Spacers (x2)
- Insulating Phenolic Washers (x2)
- Stainless Steel Mounting Bolts (x2)
- Viton O-rings for OEM Injectors (x6)
Additional fittings may be necessary for some applications.
NOTE: This fuel rail kit does NOT come standard with fittings (see port configurations below).
The Front, Rear, and Center Ports use 8AN ORB (3/4"-16 O-ring threads) to accept many adapter fittings for custom high flow fuel system builds. If the OEM Fuel Pressure Regulator will be reused, select the 20-0303 FPR Adapter option for the Front Port. The Gauge Port has 1/8" NPT female threads commonly used for a fuel pressure gauge/sensor or it can be plugged. Use the optional check boxes above and the diagram below to select the appropriate port configuration for your specific application.
- R32 GTR (BNR32)
- R33 GTR (BCNR33)
- R34 GTR (BNR32)