HARD Motorsport Fender Flares - BMW E36 Coupe
Vendor: HARD Motorsport
Available: In stock
On all products!
60 days return policy
The HARD Motorsport E36 coupe Rivet-on Fender Flares are a ready-to-go option, which will allow you to run the wider rubber you want for track days or autocross sessions.
FRONT: Aprox 25mm wider
REARS: Aprox 30mm wider
(flares taper around the wheel arch, so "width" is not the same around the entire arch. Widest point may not be the "top" of the wheel arch.
We used factory BMW E46 330 fenders to create the shape and profile of our flares to maintain that distinctive factory look. The HARD Motorsport Fender Flares are specially designed to allow you to keep your factory BMW moldings intact and to retain the classic, factory look of your car.
Manufactured from thermoformed ABS plastic, so they won't break like fiberglass versions. The HARD Motorsport's Fender Flares can be prepped and painted to match, so you have options.
Replacement sets can be purchased in front or rear pairs only if you happen to have a mishap on or off the track. We won't tell.-Since these are manufactured in pairs, the cost of manufacturing is the same, so a single flare is the same price as the pair.
Installation is fairly straightforward. These are functional fender flares, so cutting of the factory fenders is necessary to run larger, wider wheels and tires. Modification to the inner fender and fender liner is up to you. We recommend sealing of the rear inner fenders to seal the trunk/cabin from the exterior wheel well.
Fitment: E36 M3 coupe and E36 non-M coupes with M3 side moldings.-These Flares are made to accommodate the wider motorsport side moldings.
Our Fender Flare kit includes:
- 4 unpainted, fender flares (marked for drilling)
- 1 package of black rivets for easy installation and a clean appearance
- Trimming of the side molding recess is required. These are left on during shipping to maintain shape and prevent damage.
- Trimming of "lip" along the flare edge may be necessary for some wheel/tire fitment.
-Note:-275/35/18 Hoosier R6s on 18x9.5 ET35 Apex Arc-8 wheels are shown in the images.
-WHEEL/TIRE: We-run up to 285/30/18 rubber on 18x10 et25 wheels on both the front and rear on our E36 for track days or autocross sessions.-
**We have run this wheel/tire combo as listed above on our house-car with proven results. We cannot confirm fitment of other wheel/tire combinations that we have not tested. Fine tuning and suspension adjustment may be necessary. It is nearly impossible to determine compatibility with the endless variety of suspension, wheel, and tire combinations that are possible. We'll give you the extra room, the rest is up to you!
HARD Motorsport Fender Flares are made in the U.S.A.!!!