GKTech - Z33 350Z CAR SPECIFIC E-BRAKE MOUNT (Z33XMOUNT)
Available: In stock
On all products!
30 days return policy
When installing a hydraulic e-brake in your car, you'd typically have to drill holes or weld a bracket in place. We understand that not everyone wants to do that, so we've made these bolt in brackets. The brackets bolt to the stock transmission shifter hole and allows you to fit our hydraulic e-brake assembly without modifications to the transmission tunnel.
- 100% direct fit with no modifications required to the trasmission tunnel
- Available for either center console or side mount LHD and RHD variants.
- Laser cut from 5mm thick 4130 Chromoly sheet and zinc coated for longevity
- Includes 4x replacement M6x20mm bolts
NOTE: Console version will require some trimming under the center console and require you to cut a hole for the lever.
NOTE #2 Inside and outside mounts refer to the position of the handbrake lever when using our mounting plates.
Inside mount = mounts inside/within the center console itself, this will require trimming beneath the AC unit when used on both the left and right-hand side.
Outside mount = mounts outside the center console itself, no modifications required to the trim when used on both the left and right-hand side.
Please refer to product images upon ordering.
NOTE #3 Outside mount when used on the drivers side may have contact with the OEM seat when the seating position is close to the steering wheel, the OEM seat can still be used but can cause damage with prolonged use.
Will this work with "insert brand of hydraulic e-brake here"?
No, this bracket is designed specifically for our hydraulic handbrake assembly.
Are any permanent modifications required to fit this bracket?
The side mount brackets can be installed with zero modifications. The console mount option will require trimming of the center console and cutting a hole for the lever (obviously)