CNC71
CNC71 - DRIFT ADAPTERS FOR BMW E46 - STOCK ARM
CNC71 - DRIFT ADAPTERS FOR BMW E46 - STOCK ARM
SKU: AS-E46 ⓘ
Get the best deal with our price match guarantee.
Contact us today!
(239) 270-5116
sales@drifthq.com
ENTRIES: 28
This purchase would enter you into the 1 of 20 Signal Green F80 M3 giveaway with 28 entries. Learn moreCouldn't load pickup availability
The subject of a sale is a set of adapters with assembling bolts for the stock arms.
These adapters are milled on CNC machines, which gives a high-quality finish and 100% matching the adapter to the steering knuckle and kingpin ends. Aluminium used in production is the hardest one according to Polish standards.
During assembly, the steering rod and its end should get shortened by 1 cm - the body remains intact.
The minimum internal diameter of the rim should be 370 mm so the adapter could be assembled.
The set includes:
- an adapter for the front LEFT arm – 1 piece
- an adapter for the front RIGHT arm - 1 piece
- set bolts - 4 pieces
We add an operating manual to the set.
Hey there!Please verify with us on stock levels prior to ordering this item if this is needed urgently, as not all of these items are in stock with us currently and may hold a 3-4 week ETA before shipping!
Thank you for your understanding and patience!”
tie rod recieving holes were not properly drilled and have caused me to go through 3 sets in a 4 day span. i ordered another set to compare for a different e46 and the same thing . waitihg on reply for customer support currently
great quality fits as it should, and work great
Really nice quality part. Looks good fit good. Works great a lot more angle. Needs some instructions in the box to know where to cut tie rods would make install quicker.
Im happy with the results, added a decent bit of angle even with the sway bar attached.
So the things I didn't read before hand... you need a M12 allen key or socket (all my kits stopped at M10). You will have to grind down the knuckle a little so the nut will fit. Neither of these are an issue just save yourself a parts run and make sure you grab the m12 hex socket and make sure you have some flap disc before you tear the car apart. (Sway bar was not attached in the photo)
Just make sure you bolt check after every event!
-
Same Day Fulfilment!
12PM ET cutoff*
-
30 days return policy
New products updated daily!
-
Mon - Fri Customer service
10am - 5pm