Achilles Motorsports - Upgraded Oil Pump Shaft Kit - BMW S54/S50B30/B32Euro Engine Swap using M50 Pump Conversion (11-AM-UOPSK-S54C)

Achilles Motorsports - Upgraded Oil Pump Shaft Kit - BMW S54/S50B30/B32Euro Engine Swap using M50 Pump Conversion (11-AM-UOPSK-S54C)

Vendor: Achilles Motorsports

Available: In stock

SKU: Achilles Motorsports-11-AM-UOPSK-S54C

$199.50

Our S54 Conversion shaft is designed to work on late model M50/S52US generation pumps shown below in the green box. This is a typical conversion when retrofitting an S54 engine...
 
FAST SHIPPING

On all products!

 
RETURNS

60 days return policy

 
TELEPHONE SUPPORT

(239) 270-5116

Our S54 Conversion shaft is designed to work on late model M50/S52US generation pumps shown below in the green box. This is a typical conversion when retrofitting an S54 engine into a chassis such as an E30 or E34 that requires the use of a front sump oil pan.

This kit can also be used to upgrade the Euro S50B30 3.0L Single Vanos engine oil pump to the later generation pump utilizes a higher volume pump.

After witnessing countless instances of the oil pump shaft shearing off or splines stripping and oil pump nuts falling off or coming loose, all of which result in instant loss of oil pressure, we decided to develop solution. Don't let your oil pump leave you stuck with costly engine repairs or even worse!

Now included at no additional charge is our EDM Drilled Grade 8 Bolt and piece of safety wire to lay your worries to rest for good!
The ULTIMATE SOLUTION for your S54 Swapped car offered only by Achilles Motorsports.


Key Features
  • Hardened chromoly centerless ground shaft
  • EDM Drilled Bolt with a piece of safety wire included
  • Grade 8 extended length hardware to secure the gear to shaft
  • Left hand threaded to prevent it from unexpectedly coming loose
  • Exclusive square cut locking corner keyed shaft and matching drive gear
  • 100% serviceable & rebuildable without the need for grinding of welds.

Pre-Pressed Option
We offer the pre-pressed option as a way to make it easier for you to install the Upgraded Oil Pump Shaft kit yourself. In the upgrade we include a new Genuine BMW Inner Rotor pre-installed on our Achilles Motorsports Upgraded Shaft so you all you have to do is remove the old assembly and drop this one right in! No more worries about paying a shop to press it in for you or ensuring you've got the right dimensions!

Fits the Following Vehicles & Engines
  • BMW S54 when converted to Late Model M50 Style Pump
  • Euro S50B30 3.0L Single Vanos Engine when upgraded to Late Model M50 Style Pump

Reviews

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Scroll To Top