FDF - Nissan/infiniti 350Z/G35 Mantis angle kits
Vendor: FDF Raceshop
Available: In stock
On all products!
60 days return policy
The Mantis Kit for the 350Z/G35 is the most relevant angle kit in today's drift society, and here's why,
-Angle, 55 degrees+, more can be achieved by shaving material off the factory knuckle and shock bolt.
-Ackerman, 4 degrees ackerman per side (lead wheel at 55, trail wheel at 49) with our offset rack spacers.
-Roll Center, stock roll center using factory knuckle
-Bump steer, minimal bump steer in drift by perfecting tierod pitch angle
-Castor, factory caster when using stock UCA or adjustable caster when paired with FDF UCA
-Camber, optimized camber at -5.5 to counteract caster at full lock.
-Track Width, adjustable range from 25mm-50mm wider per side creating a stable and high clearance front end
-Suspension Travel, long travel range, full lock to full lock at any point throughout suspension travel for increased grip
-Joints, Chromoly heim joints and spherical bearings with self lubricating nylon race, easily replaceable
-Weight Reduction, scissor frame constructed arms with crumble zone to save mounting points from failing under impact, 2024 aluminum used where possible which provides steel like strength at 40% weight reduction.
Lower arms kit includes
2- mantis arms
2- inner tie rods
2- knuckles adaptors plates
2- outer tie rods
2-offset rack spacers
all hardware required for install included
Lower + upper control arms kit
includes adjustable uppers in addition to all lower parts